Pleasant greeting to all,
I am hoping this time it is really solved. With this new and very simple device I believe the Bessler Wheel has been solved. Although the idea is simple, it takes a lot of explanation for it to be fully understood and I hope you understand me.
http://www.besslerwheel.com/forum/files/bessler_tube_4.jpg
First picture figure 1, the device is basically one tube (that is full with air) inside another tube (filled with water). The construction denotes its operation, so figure 2 shows (by colors) the different parts. The green and blue are the inside and outside tubes respectively. The pink is a handle (could be another tube or solid material) for the inside tube. This handle fits inside a smaller tube, which is purple; this smaller tube is the handle for the outer tube. This arrangement will give the inner tube free movement to that of the outer tube. Using the tubing of a bicycle tire ( or any rubber tube that can do the job) you create a seal from the base of the pink handle, over the pink handle and folded back and connected to the inside base of the purple handle. This connection will create an effective seal and still allow free movement of the inner tube.
The third figure shows two of these devices one above the other. The pink handles are connected together and the outer tubes are fixed and fastened to the frame that is holding it. This will allow the inner tubes of both devices to move up and down freely. When the outer tube is filled with water it will allow the inner tubes to go up, this will cause the remaining water to go to the bottom (which I labeled base). This cause the device to be bottom heavy, but as ‘they’ say nothing is truly free. You must trade movement for weight, for the more movement you get going up and down the more bottom heavy the device will be. But the device can be optimized. But, also, if you design this device differently and connect it to some of the other ideas of this forum, you will have many different kinds of Bessler wheels. Because this devi... more
Posted By: Besslers Assistant
In Topic: Agood Bessler Wheel idea
|
