BesslerWheel.com

[Ken]

I discovered something I thought was very important and wanted to share it. I was ridiculed and not prepared for it. So I deleted everything.

I have since sent Private messages to a couple people trying to encourage them in the right direction, and I am accused of trying to steal their design.

HAHAHA They post their design, then accuse me of trying to steal it? Psychotic.

Your designs don't work and won't work. I have no need to steal worthless ideas.

I know there has to be at least 3 people here who aren't negative or psychotic. Still lookin.

And the sorting continues.

[Ken]

Be careful, if someone posts 2 designs, and you share your opinion with them that one of the designs is a better one to pursue, that means you are stealing.

hehehehe How does one even get there? It hurts just to type it.

[KAS]

Ken,

You broke the golden rule I'm afraid.

You must never state you have the answer without a physical working model.

Many have proclaimed as such in the past but soon disappear in a haze of embarrassment.

Sharing ideas is fine. No proclamations though; it's a no-no. Unless you can prove it.

Stick to that unofficial rule, and others will start listening.

Kas

_________________
“We have no right to assume that any physical laws exist, or if they have existed up until now, that they will continue to exist in a similar manner in the future.”

Quote By Max Planck father of Quantum physics 1858 - 1947

[FunWithGravity2]

I would say that 95% of the members probably initially joined the forum because they believed they had the answer at that time. There is the possibility that they may have had an interest and thought it would be neat to get involved in PM/gravity wheel discussion but i would be willing to say confidently MOST thought they had something important and wanted to initially talk with like minded people or see if anyone else had the "same" idea.

I would highly doubt that anyone with a completed and running concept would search out a site to taunt or educate others in the true nature of what they all searched for. I came here in the beggining like most others and had the answer, only to find out like most that my thoughts were so basic and lacked the ability to comprehend the multitude of factors that would be needed for an evenetual solution.

This site is a constant reminder of the human nature of people and the way in which the screen name "ken" has behaved has been exibited by hundreds of others in the past and will continue to in the future. Those who have been here long enoguh will try to steer him into calm contemplation and others will taunt and ridicule. Newbies will wonder why/what is going on, and Ken will continue to operate in his delusional state of affairs where he is the all knowing genius.

Hopefully when the euphoria of ignorance wears off new members are able to assimilate themselves into productive learning by studying feedback and dsicussion on basic concepts that might lead to an understanding of items to look for in there search for the elusive solution. Most aren't able to get past that and continue to return on an annual migration of sites screaming about working concepts but never completing a POP.

Best of luck with your evolution, your right on track with most.

Crazy Dave

_________________
Si mobile in circumferentia circuli feratur ea celeritate, quam acquirit cadendo ex
altitudine, quae sit quartae parti diameter aequalis ; habebit vim centrifugam suae
gravitati aequalem.

[Ken]

KAS

I appreciate the input, but I am not bound by unofficial rules those without the solution create. Nor will I conform to them. At this point I do not care if anyone listens. It makes the sorting easier.

I actually gave away the design 2 years ago to many people. I am sure they just stuck it in their spam folders or deleted them. I did however have to make 2 slight modifications from the original design.

During the calculation phase, X/1 should have been inverted to 1/X. This was easily remedied during the build. Once the inversion was included the lever modification revealed itself.

If one were to take my original design and the MT drawings they could narrow down their search significantly.

When someone starts presenting the solution, the RULE is wait until they finish. Ridiculing without even knowing the design is a nono. That is MY OFFICIAL rule. :)

Now you stated

[Ken]

FunWithGravity2 said

[ruggerodk]

[Andyb]

Hi Ken,how are you doing,i unlike others believe you have some thing very interesting as i have already said ,what i do not get is why some people have to get into conflict over there ideas ect,i joined this site to prove overunity does exist and unity is the way to go forward to save our planet for future generations and all the beasties we share it with ,in my experience Ken when people dont get on, do not bother, the real purpose is to create and to love it and find others of the same state of mind, good luck with your work Ken and save your energy for more important things,lol Andy.

_________________
Only by making mistakes can you truly learn

[Ken]

On the contrary.

Lets examine the facts.
I was willing to share and answer any questions.
What happened was, as someone recently told me, "its like throwing a bone to a pack of wolves"

Then I decide to stop sharing and being devoured, hahaha, and I try to encourage people privately. I am then accused of trying to steal a non-working patented design. LMAO!!!!

When I say there is nothing here I need, its quite true.

I feel like I am the guy who came to the keg party with the tap, and people are bitchin at me for interrupting their thinkin session on how to get the beer out of the keg.

So I have wandered a couple houses down, tapped the keg there, and am having a great time. Oh I will wander back here with my beer in my hand and HELP you in your "Thinkin Sessions" hahaha

I think I may have found 2 of the 3 sane people I have been looking for.

:)

[Ken]

Andy,

I will keep you updated on the progression of the project.
I am actually writing a script for the video. I have never produced anything, on video and don't want 750 takes.

If you have any suggestions I would appreciate it.

I was thinking of maybe starting with a concrete driveway with nothing there, then show the stand being set down and view that from all sides. Then set the axle of the wheel in the saddles.

At first I was thinking in a room in a house, but then people might think I drilled a hole in the floor or something.

Then in the yard, but then I would have dug a hole to fake it somehow. HAHA

[Ken]

And Ayn Rand was a psycho.

[justsomeone]

Ken, If you need one more sane person to work with, please, please.......


Count me out!

_________________
. I can assure the reader that there is something special behind the stork's bills.

[ruggerodk]

Ken - The reason you say that...was her point.

> count me out too

[rlortie]

justsomeone

[justsomeone]

Ralph, ONLY the top quote was from me. Personally I take offense to being linked to quotes not from me. ;)

I hope all is well Ralph!