A new idea on gravity powered engine to be considered.And it's again Non-Perpetual.
Wed Jun 06, 2012 9:23 am
[ 
Mood: Cool ]
Mood: Cool ]One idea has came into my my mind to make another type of gravity engine.
If you take a ball up through straight vertical and let it come downward through semicircle with the centre of circumference of semicircle,being slightly extended as a slightly sharp more outward corner,gravitational work done to let ball slide along the curved path is more than work supplied to lift up ball in upward vertical direction.
We can somehow use this principle to make a real Gravity engine.
And also note that more gravity is directly used in a curved downward path than going against gravity in a upper vertical path,and hence this principle is not a Perpetual Motion Machine concept.
Defination of Perpetaul Moion Machine:
Perpetual motion describes hypothetical machines that produce more work or energy than they consume, whether they might operate indefinitely or not.
See gravity points on floor line are like arrays and when heavy ball moves over the half semicircle the ball slides over horrizontal axis two times once right to left circumferential centre and then left circumferential centre to right downwards due to gravity.
Then ball is taken upward through vertical straight on right by supplying some energy.
This is how we can make gravity engine to work with heavy balls.
If the semicircle is stretched outwards from circumferential centre,you will be able to recover energy supplied from centre of circumference to downward floor motion and you will convert gravity to usable output from top most ball position to centre of circumference.
For efficiency,it is better if the semicircle is stretched outwards.A proper shape of curve ,similar to triangle with curved corners is necessary.
It is a common sense that for more distance to be covered you need more energy.For less distance to be covered,you need less energy.Vertical distance is straight and needs less energy to be supplied to lift heavy ball.(Remember that ball should be lifted in a straight path and it should not be lifted along a parabolic like curve)
The curve streched semicircular distance is much greater than Vertical straight distance.So more gravitational energy is needed to displace weight over more distance.
This is no way a perpetual motion machine But it converts Gravitational energy into Electrical energy.A Perpectual motion machine is not a energy converter but a new energy creator which is Impossible.
Note:This is a gravity engine idea basic principle but this is not a gravity wheel.Hence,we need to device a system in which ball can be slided over rails/paths as well as we need to devise a system to convert sliding movement of ball into electricity.This is therefore complex.This is just an idea,not an engine.
It is not necessary that all gravity engines are a single big gravity wheels without other equipments.
You all here are welcome to convert this flow process/idea into a proper machenism.Lets invent together.
--------------------------------------------------------------------------------------------------------------
Let me ellaborate more on this:
To explain my concept(Idea/Flow Process) elaborately,I would like to explain you an another example.
Consider 2 points A and B.
You spend some energy from combustion to let car travel from A to B straight horrizontally.
The Work done is Force * displacement = F*X.
(Now let this be similar to giving electrical energy to lift heavy ball upward vertically straight.)
Now the car is at position B.
Now let it has to travel back to A in a "different zigzag path "rather than "straight path."
Now in doing so,since the path is not straight X displacement BUT the path is Zig zag displacement,
let the car travels say Y zigzag displacement.
Zigzag displacement is greater than straight displacement.
Hence Work done of combustion for travelling from B to A is F*Y.
(Now this is similar to gravitational force acting in vertical plane which causes displacement of heavy ball around zigzag path)
F* Y is greater than F*X.
To explain the concept on vertical plane,I used the Example of a car traveling on a Horrizontal plane.Let us now talk about the idea of a gravity engine:
Now work done by Gravitational energy from B to A along Zigzag path is more than Work done along straight vertical by electrical power input along A to B.
Hence
F*Y(gravitational work from B to A on Zig Zag path)>>>F*X(electrical input work from A to B Vertically)
F*Y - F*X = Net Residue gravitational Energy
Now this Net Residue gravitational energy should be converted into electrical energy by a sliding path energy conversion machenism which is yet to be designed.
Now this is possible because Gravity acts in a array on floor.
That means gravity is not only acting between points A and B vertically,but it is also acting at each and every other point of the zigzag path.The gravity acting on the Zigzag path is like UDL(Uniformly Distributed Load) which we use in engineering.So this gravity then acts on heavy ball when it is Slidding over this ziggag path.
And yes I am not neglecting frictional and other losses in the actual machenism.
To accomplish this Zig zag displacement along downward direction only,I have suggested to take the heavy ball up through straight vertical (through some electrical input)and let it come downward through semicircle with the centre of circumference of semicircle,being slightly extended as a slightly sharp more outward corner;so that gravitational work done to let ball slide along the curved path is more than work supplied to lift up ball in upward vertical direction.
The reasion behind stretching the semicircular downward path from the centre is to increase efficiency by providing more gravitational force to act over more increased path of travel.
I have mentioned only an idea OR Flow Process and not actual machenism,just like a Flow Chart.
The only thing left now is converting this "Flow Process" idea into a proper machenism which I have to do yet for which I need your similar help that you provided to Raj on Monday Monday!!!
You all here are welcome to convert this flow process/idea into a proper machenism.Lets invent together.
This is extremly challenging design because I need to convert Slidding Motion into Electrical energy for which I may use two sided Semiconical cross sectional paths/rails and perhaps no body or very less people might have made a two sided conical Rail design.
Note that this the actual mechanism designed most probably may not be made as a wheel.
Instead ,I may want to convert sliding motion of ball into electricity.